Nelio ES6 Series

By | Athena Ready | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • 3 Fixture cross section sizes available as ES64, ES65 and ES66 models
  • Recessed, Surface, Suspended and Wall mounting options
  • Build 2 Spec customizable
  • Standard White, Black and Silver powder coat finish. Custom Colors available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
  • Available with Akustik sound deadening acoustic options
  • Available with integral Lutron Athena Wireless Nodes (AWN) and Sensors (AWNS)

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • 6” nominal width housing in 4.0”, 5.18” or 6.38” depths, standard lengths to 8′
  • Direct, Indirect or Direct/Indirect output options
  • Separately specifiable lumen output options for direct / indirect output
  • Lumen output options: 350 – 4400 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • Multiple lens diffusion options for both direct and indirect output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated
  • Wet Location Rated optional

Pallo SL

By | Uncategorized | No Comments

Pallo SL (SL = slim) is a family of low-profile disc fixtures for suspended mounting via a monopoint canopy with (3) AC cables. Drivers are remotely mounted and a single 2-wire low-voltage cord delivers power to the LED tape in the disc fixture.

All versions are available in 12″, 18″, 24″ 36″, and 48″ nominal outside diameters. The disc height/thickness is 1.5″ and is a spot-welded assembly of two spun steel rings and three punched and formed hanging brackets. Drivers are remote mounted standard. An optional canopy-mounted driver is available on certain models (consult factory).

  • 12″, 18″, 24″, 36″, and 48″ nominal diameters
  • Slim 1.5″ overall housing height
  • Monopoint canopy suspended mounting
  • Full diameter and ring illumination options
  • PMC akūstik sound deadening panel options
  • 1380 to 15,620 initial Lumen outputs available
  • 2700k, 3000k, 3500k, 4000k CCTs available standard
    • (Consult factory for other color temperatures)
  • Tunable white 2700-6500k available
    • (Consult factory for other tunable ranges)
  • 80CRI and 90CRI options available
  • All drivers remote mounted – no bulky power feed cord
  • Canopy-mounted driver available for some applications
    • (Consult factory for availability information)
  • 0-10V dimming driver down to 1% standard
    • (Consult factory for other dimming options)
  • Remote-mounted emergency battery pack available
  • L70 > 72,000 hours
  • Luminaires cETLus listed for dry and damp locations

Nelio QS-ES44

By | New Releases | No Comments
  • Direct distribution from a single row of high efficiency LED boards
  • Polyester powder coat finish In choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel.
  • cETLus Listed, Damp Location rated

akūstik AK9096

By | Uncategorized | No Comments
  • akūstik sound deadening panel – sound absorbing range between .45-.90 NRC
  • Slate, Pewter, Smoke panel colors standard (other colors available)
  • Polyester powder coat finish – White, Black, Silver standard (custom colors available)
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel
  • Direct, Indirect, or Direct/Indirect distributions
  • Flush or 1″ regressed panel position
  • 2700 to 5000K LED color temperatures
  • Standard 0-10V, 1% dimming drivers (Consult factory for other dimming options)
  • Up to 2200lm/ft output
  • 80+CRI standard, 90+CRI optional
  • cETLus Listed, Damp Location rated
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

akūstik AK9094

By | Uncategorized | No Comments
  • akūstik sound deadening panel – sound absorbing range between .45-.90 NRC
  • Slate, Pewter, Smoke panel colors standard (other colors available)
  • Polyester powder coat finish – White, Black, Silver standard (custom colors available)
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel
  • Direct, Indirect, or Direct/Indirect distributions
  • Flush or 1″ regressed panel position
  • 2700 to 5000K LED color temperatures
  • Standard 0-10V, 1% dimming drivers (Consult factory for other dimming options)
  • Up to 2200lm/ft output
  • 80+CRI standard, 90+CRI optional
  • cETLus Listed, Damp Location rated
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

akūstik AK3516 Series

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • Matching lightless panels
  • 20 Available sound deadening shroud colors
  • Suspended mounting
  • Build 2 Spec customizable
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • Sound absorbing range between 0.45 – 0.90 NRC
  • 5” nominal width housing x 16” depth, standard lengths to 8′
  • Direct, Indirect or Direct/Indirect output options and lightless panels
  • Lumen output options: 350 – 2200 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • 5 Beam shaping lens options for Diffuse, Asymmetric, Bat Wing, Wall Graze and Wall Wash output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated

akūstik AK3512 Series

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • Matching lightless panels
  • 20 Available sound deadening shroud colors
  • Suspended mounting
  • Build 2 Spec customizable
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • Sound absorbing range between 0.45 – 0.90 NRC
  • 5” nominal width housing x 12” depth, standard lengths to 8′
  • Direct, Indirect or Direct/Indirect output options and lightless panels
  • Lumen output options: 350 – 2200 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • 5 Beam shaping lens options for Diffuse, Asymmetric, Bat Wing, Wall Graze and Wall Wash output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated

akūstik AK3510 Series

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • Matching lightless panels
  • 20 Available sound deadening shroud colors
  • Suspended mounting
  • Build 2 Spec customizable
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • Sound absorbing range between 0.45 – 0.90 NRC
  • 5” nominal width housing x 10” depth, standard lengths to 8′
  • Direct, Indirect or Direct/Indirect output options and lightless panels
  • Lumen output options: 350 – 2200 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • 5 Beam shaping lens options for Diffuse, Asymmetric, Bat Wing, Wall Graze and Wall Wash output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated

Nelio ES44-DI

By | Athena Ready | No Comments

FEATURES

  • Construction: Welded extruded aluminum housing with internal components made from die-formed cold rolled steel.
  • Direct/Indirect distribution from separate rows of high-efficiency LED boards, separately specifiable lumen outputs
  • 4″ W x 4.5″ H cross-section
  • Standard 0-10V, 1% dimming drivers, 2 circuit option for separate direct and indirect switching/dimming
  • L7O greater than 54,000 hours
  • Suspended and Wall mounting options
  • Build 2 Spec customizable
  • Standard White, Black and Silver powder coat finish. Custom Colors available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
  • Available with Akustik sound deadening acoustic options
  • Available with integral Lutron Athena Wireless Nodes (AWN) and Sensors (AWNS)

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • 4” nominal width housing in 4.5” depth, standard lengths to 8′
  • Direct/Indirect output
  • Separately specifiable lumen output options for direct / indirect output
  • Lumen output options: 350 – 2200 LM/FT
  • Full range LED color temperatures, 80CRI standard, 90CRI optional
  • Multiple lens diffusion options for both direct and indirect output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated
  • Wet Location Rated optional

REVIT FILES

Nelio S9062

By | Uncategorized | No Comments

FEATURES

  • Direct distribution from 2 rows of reflected LED lighting through a lens-free aperture.
  • Recessed, Surface and Suspended mounting options
  • Build 2 Spec customizable
  • Standard White, Black and Silver powder coat finish. Custom Colors available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
  • Available with Akustik sound deadening acoustic options

SPECIFICATIONS

  • Stamped and formed steel housing with internal components made from die formed cold rolled steel
  • 75” nominal width housing x 5” depth, standard lengths to 8′
  • Direct or Direct/Indirect output options
  • Separately specifiable lumen output options for direct / indirect output
  • Direct Lumen output options: 700 – 2900 LM/FT
  • Indirect Lumen output options: 350 -1450 LM/FT
  • CCT Color Temperature Options: 3000k to 5000k, 80CRI standard, 90CRI optional
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated
  • Open or Closed end cap options