Sep 09
0

CLR-2199

By | New Releases | No Comments
  • Precision formed, TIG welded, 20 gauge cold rolled steel housing with no visible, external hardware.
  • Flange installation is supported by swing-style mounting brackets. Grid installation suitable for 1” and 1.5” T-Bar ceilings. See ordering key for additional 2” T-Bar support.
  • One piece door frame, fabricated from 18 gauge, cold rolled steel with TIG welded corners. It is retained by stainless steel aircraft cables. Flathead, stainless steel, captive fasteners with integral silicone o-rings easily secure door frame to housing. Gasket seals door frame to housing.
  • LED board arrays offered in various color temperatures and lumen packages. Optional RED LED arrays available on separate circuits (consult ordering key).
  • Symmetric optic includes diffused impact-resistant acrylic lens. Lens sealed to door frame with continuous retention system and supported with stainless steel aircraft cables.
  • Long life LED’s coupled with high-efficiency drivers provide quality illumination. Rated to deliver an L80 performance >50,000 hours. The standard driver has a THD of <20%. Standard low voltage dimming (0-10v, 1%). All electrical components are CSA or UL approved. A ½” EMT hole is provided for wiring connections.
  • UL Listed for insulated ceilings, wet locations. IP65. Suitable for 2500psi pressure spraydown. NSF listed option.
Mar 15
0

Rinata R68

By | Uncategorized | No Comments

Rinata focuses on clean design, premium performance, precise angle alignment, superior glare control, and ease of installation. One light engine with various accessories for customization. R68 is a 68mm aperture. 2.70” diameter. Adjustable, fixed, and wall washer options. All offered in square, round, as well as a trimless option to make your downlight invisible in the ceiling. 10°, 20°, 24°, 40°, & 50° beam angles are available. 90 CRI Standard. 30° Tilt/ 355° rotation with fixed options available. Optimal heatsink design with minimal depth. The anti-glare ring provides eye comfort. Easy to change reflector options in black, specular, haze, and white. Easy to install.

Mar 15
0

Rinata R45

By | Uncategorized | No Comments

Rinata focuses on clean design, premium performance, precise angle alignment, superior glare control, and ease of installation. One light engine with various accessories for customization. R45 is a 45mm aperture. 1.77” diameter. Adjustable, fixed, and wall washer options. All offered in square, round, as well as a trimless option to make your downlight invisible in the ceiling. 10°, 20°, 24°, 40°, & 50° beam angles are available. 90 CRI Standard. 30° Tilt/ 355° rotation with fixed options available. Optimal heatsink design with minimal depth. The anti-glare ring provides eye comfort. Easy to change reflector options in black, specular, haze, and white. Remote driver. Easy to install.

Mar 15
0

Rinata R100

By | Top 10 | No Comments

Rinata focuses on clean design, premium performance, precise angle alignment, superior glare control, and ease of installation. One light engine with various accessories for customization. R100 is a 100mm aperture. 3.94” diameter. Adjustable, fixed, and wall washer options. All offered in square, round, as well as a trimless option to make your downlight invisible in the ceiling. 10°, 20°, 24°, 40°, & 50° beam angles are available. 90 CRI Standard. 30° Tilt/ 355° rotation with fixed options available. Optimal heatsink design with minimal depth. The anti-glare ring provides eye comfort. Easy to change reflector options in black, specular, haze, and white. Easy to install.

Feb 12
0

pūr-led™ 4LESQPLS

By | Uncategorized | No Comments
  • Antimicrobial 405nm wavelength antimicrobial lighting LED Fixture
  • Various Antimicrobial LED board options.
  • Diffuser: Solite Tempered Glass Lens
  • Trim: Haze anodized reflector is standard.
  • Sliding light engine for easy service.
  • Wet Location Optional

Construction: Housing – Fabricated from stamped and die formed galvanized steel. Supplied with a junction box suitable for through wiring (4in/4out). Trim – Integrated LED module with Spun Aluminum Reflector.

Output: 1000lm and 1600lm versions available

Dimming: Fixtures supplied with 0-10V dimming down to 1% as standard. Other Dimming option are available (Consult Factory). *

Listing: Fixtures are cETLus listed for Damp Location.

Feb 12
0

pūr-led™ 4LEPLS

By | Uncategorized | No Comments
  • Antimicrobial 405nm wavelength antimicrobial lighting LED Fixture
  • Various Antimicrobial LED board options.
  • Diffuser: Solite Tempered Glass Lens
  • Trim: Haze anodized reflector is standard.
  • Sliding light engine for easy service.
  • Wet Location Optional

Construction: Housing – Fabricated from stamped and die formed galvanized steel. Supplied with a junction box suitable for through wiring (4in/4out). Trim – Integrated LED module with Spun Aluminum Reflector.

Output: 1000lm and 1600lm versions available

Dimming: Fixtures supplied with 0-10V dimming down to 1% as standard. Other Dimming option are available (Consult Factory). *

Listing: Fixtures are cETLus listed for Damp Location.

Sep 24
0

Peri-Mittari E3126

By | Uncategorized | No Comments
  • Snap-in lenses to control light distribution for Diffuse, Asymmetric, Bat Wing, Wall Graze and Wall Wash applications.  Asymmetric lenses are reversible in fixture for toward or away from the wall output
  • 3 cross sectional profile widths, 2.5″, 3.25″, and 4.0″
  • Mounting options for all common ceiling types
    Continuously illuminated direct output with corners available
  • Customizable under PMC Lighting’s Build2Spec program
  • Wet location available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Feb 11
0

Silea SC2191

By | Uncategorized | No Comments
  • 4.50″H Troffer, Linear LED fixture
  • Direct distribution
  • Nominal 1’/2′ x 2′ and 1’/2′ x 4′
  • Wet Location Rated, cETLus Listed
  • Outputs up to 8800lm for 1’/2′ x 2′ and 17600lm for 1’/2′ x 4′
  • 2700 to 5700k, Tunable White and Color options
  • 80CRI standard, 90CRI optional
  • 0-10v dimming down to 1% standard, other options available
  • Lens diffuser options for internal lens
  • Recessed T-Grid or Flanged mounting options
  • White powder coat standard, custom colors available
  • Chicago plenum version available
  • Vandal resistant optional
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Oct 10
0

Nelio ES44-TR

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • Tamper resistant construction with steel framed lens and tamper resistant hardware
  • Recessed, Suspended, Surface and Wall mounting options
  • Build 2 Spec customizable
  • Standard White, Black and Silver powder coat finish. Custom Colors available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
  • Available with Akustik sound deadening acoustic options

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • 4” nominal width housing in 4” depth, standard lengths to 8′
  • Direct output
  • Lumen output options: 350 – 2200 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • Multiple lens diffusion options
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated
  • Gasketed Wet Location Rated optional
Oct 03
0

Nelio ES6 Series

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • 3 Fixture cross section sizes available as ES64, ES65 and ES66 models
  • Recessed, Surface, Suspended and Wall mounting options
  • Build 2 Spec customizable
  • Standard White, Black and Silver powder coat finish. Custom Colors available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
  • Available with Akustik sound deadening acoustic options

SPECIFICATIONS

  • Extruded aluminum welded housing with internal components made from die formed cold rolled steel
  • 6” nominal width housing in 4.0”, 5.18” or 6.38” depths, standard lengths to 8′
  • Direct, Indirect or Direct/Indirect output options
  • Separately specifiable lumen output options for direct / indirect output
  • Lumen output options: 350 – 4400 LM/FT
  • CCT Color Temperature Options: 2700k to 5700k, 80CRI standard, 90CRI optional
  • Multiple lens diffusion options for both direct and indirect output
  • 0-10v Dimming down to 1% standard, other options available
  • cETLus Listed, Damp Location rated
  • Wet Location Rated optional