Category

New Releases

Nov 14
0

Aura 6LESQ-ACT

By | New Releases | No Comments
  • Full-color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • Dimming option down to as low as 0.1%
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional
Nov 14
0

Aura 6LEC-ACT

By | New Releases | No Comments
  • Full color tunable RGBW cylinder – DMX512 with RDM input
  • Multiple reflector color options
  • multiple housing colors available
  • Dimming option down to as low as 0.1%
  • Low iridescent Alzak® reflector
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional
Nov 14
0

Aura 6LE-ACT

By | New Releases | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • Dimming option down to as low as 0.1%
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional
Nov 14
0

Aura 4LESQ-ACT

By | New Releases | No Comments
  • Full-color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional
Nov 14
0

Aura 4LE-ACT

By | New Releases | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 1.5″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional
Sep 26
0

QS-ARCX-N

By | New Releases | No Comments
  • Distribution from a single row of high-efficiency LED boards
  • Polyester powder coat finish in choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die-formed cold rolled steel.
  • cETLus Listed, Damp Location rated
  • Two circuit for separate switching/dimming standard or D/I models
Sep 09
0

CLR-2199

By | New Releases | No Comments
  • Precision formed, TIG welded, 20 gauge cold rolled steel housing with no visible, external hardware.
  • Flange installation is supported by swing-style mounting brackets. Grid installation suitable for 1” and 1.5” T-Bar ceilings. See ordering key for additional 2” T-Bar support.
  • One piece door frame, fabricated from 18 gauge, cold rolled steel with TIG welded corners. It is retained by stainless steel aircraft cables. Flathead, stainless steel, captive fasteners with integral silicone o-rings easily secure door frame to housing. Gasket seals door frame to housing.
  • LED board arrays offered in various color temperatures and lumen packages. Optional RED LED arrays available on separate circuits (consult ordering key).
  • Symmetric optic includes diffused impact-resistant acrylic lens. Lens sealed to door frame with continuous retention system and supported with stainless steel aircraft cables.
  • Long life LED’s coupled with high-efficiency drivers provide quality illumination. Rated to deliver an L80 performance >50,000 hours. The standard driver has a THD of <20%. Standard low voltage dimming (0-10v, 1%). All electrical components are CSA or UL approved. A ½” EMT hole is provided for wiring connections.
  • UL Listed for insulated ceilings, wet locations. IP65. Suitable for 2500psi pressure spraydown. NSF listed option.
Aug 10
0

Introducing Quick Ship

By | New Releases, News | No Comments

We aren’t slowing down. We’re speeding up! PMC Lighting’s Quick Ship Program has arrived. Four of our most popular fixtures will ship in 10-15 days of a processed order. QS-ES44, QS-ES254, QS-ES255-DI, AND QS-SC2134V are all shipping on time from our factory in Rhode Island.

Check out all the Quick Ship Program details below

PMC QUICK SHIP
Aug 01
0

Silea QS-SC2134V

By | New Releases | No Comments
  • 2.5″ H Troffer, Linear LED fixture
  • Direct Distribution
  • Recessed T-Grid mounting (Sheetrock installation with Flange Kit)
  • Nominal 2’x2′ and 2’x4′ sizes
  • Standard 0-10V, 1% dimming drivers
  • L90 greater than 36,000 hours
  • White polyester powder coat finish
  • Integral EM Battery backup option
  • cETLus Listed, Damp location rated
Aug 01
0

Nelio QS-ES44

By | New Releases | No Comments
  • Direct distribution from a single row of high efficiency LED boards
  • Polyester powder coat finish In choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel.
  • cETLus Listed, Damp Location rated