Aura 6LEC-ACT

By | Uncategorized | No Comments
  • Full color tunable RGBW cylinder – DMX512 with RDM input
  • Multiple reflector color options
  • multiple housing colors available
  • Dimming option down to as low as 0.1%
  • Low iridescent Alzak® reflector
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 6LE-ACT

By | Uncategorized | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • Dimming option down to as low as 0.1%
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 4LE-ACT

By | Uncategorized | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 1.5″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

QS-ARCX-N

By | BAA, BABAA | No Comments
  • Distribution from a single row of high-efficiency LED boards
  • Polyester powder coat finish in choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die-formed cold rolled steel.
  • cETLus Listed, Damp Location rated
  • Two circuit for separate switching/dimming standard or D/I models

Arcx-M

By | BAA, BABAA | No Comments

FEATURES

  • Curved extruded aluminum housing
  • Standard finishes white, black, silver
  • Other colors available – consult factory
  • Multiple color temperature choices
  • 90 CRI standard
  • 3 Lumen output levels individually selectable for direct and indirect
  • Multiple suspended mounting styles
  • All drivers/EMS are remote mounted 
  • cETLus listed for damp location 

akūstik AK9096

By | BAA, BABAA | No Comments
  • akūstik sound deadening panel – sound absorbing range between .45-.90 NRC
  • Slate, Pewter, Smoke panel colors standard (other colors available)
  • Polyester powder coat finish – White, Black, Silver standard (custom colors available)
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel
  • Direct, Indirect, or Direct/Indirect distributions
  • Flush or 1″ regressed panel position
  • 2700 to 5000K LED color temperatures
  • Standard 0-10V, 1% dimming drivers (Consult factory for other dimming options)
  • Up to 2200lm/ft output
  • 80+CRI standard, 90+CRI optional
  • cETLus Listed, Damp Location rated
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

pūr-led™ 4LEPLS

By | Uncategorized | No Comments
  • Antimicrobial 405nm wavelength antimicrobial lighting LED Fixture
  • Various Antimicrobial LED board options.
  • Diffuser: Solite Tempered Glass Lens
  • Trim: Haze anodized reflector is standard.
  • Sliding light engine for easy service.
  • Wet Location Optional

ConstructionHousing – Fabricated from stamped and die formed galvanized steel. Supplied with a junction box suitable for through wiring (4in/4out). Trim – Integrated LED module with Spun Aluminum Reflector.

Output: 1000lm and 1600lm versions available

Dimming: Fixtures supplied with 0-10V dimming down to 1% as standard. Other Dimming option are available (Consult Factory). *

Listing: Fixtures are cETLus listed for Damp Location.

Clarus 8LEC-MX3

By | BAA, BABAA | No Comments
  • 8″ Round aperture LED cylinder downlight for surface, wall and suspended mounting
  • Reflector color and diffuser options
  • 10.0″DIA x 18.88″H
  • Damp Location Rated, cETLus Listed
  • Output up to 15,000lm. 140 to 165 lm/w
  • 2700k – 6500k color temperature 80CRI standard, 90CRI optional
  • 0-10v dimming down to 10% standard, other options available
  • 20, 40 and 60 degree beam spread options
  • Surface, Wall, Pendant, Swivel Pendant and Cord mounting options
  • White, Black and Bronze powder coat colors standard, custom colors available

Clarus 6LEC-MX3

By | BAA, BABAA | No Comments
  • 6″ Round aperture LED cylinder downlight for surface, wall and suspended mounting
  • Reflector color and diffuser options
  • 10.0″DIA x 18.88″H
  • Damp Location Rated, cETLus Listed
  • Output up to 9500lm. 145 to 165 lm/w
  • 2700k – 6500k color temperature 80CRI standard, 90CRI optional
  • 0-10v dimming down to 10% standard, other options available
  • 20, 40 and 60 degree beam spread options
  • Surface, Wall, Pendant, Swivel Pendant and Cord mounting options
  • White, Black and Bronze powder coat colors standard, custom colors available

Clarus 8LE-MX3S

By | BAA, BABAA | No Comments
  • 8″ Round aperture LED recessed downlight capable of mounting in 2″ thick ceiling
  • Sliding light engine platform for servicing
  • Reflector color and diffuser options
  • 14.02″L x 17.0″W x 8.00″H
  • Non-IC Damp Location Rated, cETLus Listed
  • Output up to 15,000lm. 140 to 165 lm/w
  • 2700k – 6500k color temperature 80CRI standard, 90CRI optional
  • 0-10v dimming down to 10% standard, other options available
  • 20, 40 and 60 degree beam spread options
  • Recessed mounting with adjustable positioning