Pallo SL

By | Uncategorized | No Comments

Pallo SL (SL = slim) is a family of low-profile disc fixtures for suspended mounting via a monopoint canopy with (3) AC cables. Drivers are remotely mounted and a single 2-wire low-voltage cord delivers power to the LED tape in the disc fixture.

All versions are available in 12″, 18″, 24″ 36″, and 48″ nominal outside diameters. The disc height/thickness is 1.5″ and is a spot-welded assembly of two spun steel rings and three punched and formed hanging brackets. Drivers are remote mounted standard. An optional canopy-mounted driver is available on certain models (consult factory).

  • 12″, 18″, 24″, 36″, and 48″ nominal diameters
  • Slim 1.5″ overall housing height
  • Monopoint canopy suspended mounting
  • Full diameter and ring illumination options
  • PMC akūstik sound deadening panel options
  • 1380 to 15,620 initial Lumen outputs available
  • 2700k, 3000k, 3500k, 4000k CCTs available standard
    • (Consult factory for other color temperatures)
  • Tunable white 2700-6500k available
    • (Consult factory for other tunable ranges)
  • 80CRI and 90CRI options available
  • All drivers remote mounted – no bulky power feed cord
  • Canopy-mounted driver available for some applications
    • (Consult factory for availability information)
  • 0-10V dimming driver down to 1% standard
    • (Consult factory for other dimming options)
  • Remote-mounted emergency battery pack available
  • L70 > 72,000 hours
  • Luminaires cETLus listed for dry and damp locations

Aura 6LESQ-ACT

By | New Releases | No Comments
  • Full-color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • Dimming option down to as low as 0.1%
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 6LEC-ACT

By | New Releases | No Comments
  • Full color tunable RGBW cylinder – DMX512 with RDM input
  • Multiple reflector color options
  • multiple housing colors available
  • Dimming option down to as low as 0.1%
  • Low iridescent Alzak® reflector
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 6LE-ACT

By | New Releases | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • Dimming option down to as low as 0.1%
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 4LESQ-ACT

By | New Releases | No Comments
  • Full-color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 2″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

Aura 4LE-ACT

By | New Releases | No Comments
  • Full color tunable RGBW downlight – DMX512 with RDM input
  • Multiple reflector color options
  • LED driver and LED module accessible from below ceiling
  • Low iridescent Alzak® reflector
  • Capable of mounting in a 1.5″ thick ceiling
  • 18 ga galvanized junction box suitable for through wiring (4in/4out) #12 AWG
  • Fixture should be installed in applications where ambient temperatures do not exceed 50°C
  • Fixtures are cETLus listed for damp location, wet location optional

QS-ARCX-N

By | New Releases | No Comments
  • Distribution from a single row of high-efficiency LED boards
  • Polyester powder coat finish in choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die-formed cold rolled steel.
  • cETLus Listed, Damp Location rated
  • Two circuit for separate switching/dimming standard or D/I models

Nelio QS-ES44

By | New Releases | No Comments
  • Direct distribution from a single row of high efficiency LED boards
  • Polyester powder coat finish In choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel.
  • cETLus Listed, Damp Location rated

Nelio QS-ES254

By | Uncategorized | No Comments
  • Direct distribution from a single row of high efficiency LED boards
  • Polyester powder coat finish in choices of white, black, silver, or RAL colors
  • Standard 0-10V, 1% dimming drivers
  • L9O greater than 36,000 hours
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel.
  • cETLus Listed, Damp Location rated

Arcx-M

By | New Releases | No Comments

FEATURES

  • Curved extruded aluminum housing
  • Standard finishes white, black, silver
  • Other colors available – consult factory
  • Multiple color temperature choices
  • 90 CRI standard
  • 3 Lumen output levels individually selectable for direct and indirect
  • Multiple suspended mounting styles
  • All drivers/EMS are remote mounted 
  • cETLus listed for damp location