Apr 05
0

CLR-2199V

By | New Releases | No Comments

Premium-grade enclosed and gasketed luminaire. This IC-rated luminaire’s welded steel housing, shallow design and dust and moisture resistance make it ideal for use with indoor and outdoor (canopy) applications that require a wet location recessed lay-in T-Bar/Drywall luminaire with a door frame.

  • Ideal for shallow or obstructed plenum applications
  • Frosted prismatic acrylic diffuser
  • Standard low voltage dimming (0-10v)
  • 80+ CRI
  • Available in 1×4, 2×2, 2×4
  • Outdoor, under covered canopy
  • Wet and Dusty Environments
  • NSF Rated Available (see options)

Optical System: One piece perimeter door frame with inverted frosted, prismatic pattern #12, sealed acrylic lens. Other lenses available (see options). Mounting: Holes provided for chain-mounting support to building structure. Lay-in type luminaire for exposed grid type acoustical ceiling structure and swing style mounting brackets for drywall ceiling installation.

Construction: Die-formed and spot welded, steel housing assembly and 20 gauge steel door frame. Triple gasketed with sealed lens, gasketed door frame assembly and gasketed housing flange.

Finish: White, polyester powder painted housing.

Electrical: Long life LEDs coupled with high efficiency drivers provide quality illumination. Rated to deliver L80 performance > 50,000 hours. Standard low voltage dimming (0-10v) driver.

Approvals: Approved to CSA/UL standards.UL listed for insulated ceilings. Tested in accordance to IESNA LM-79. UL listed for wet locations.

Sep 09
0

CLR-2199

By | New Releases | No Comments
  • Precision formed, TIG welded, 20 gauge cold rolled steel housing with no visible, external hardware.
  • Flange installation is supported by swing-style mounting brackets. Grid installation suitable for 1” and 1.5” T-Bar ceilings. See ordering key for additional 2” T-Bar support.
  • One piece door frame, fabricated from 18 gauge, cold rolled steel with TIG welded corners. It is retained by stainless steel aircraft cables. Flathead, stainless steel, captive fasteners with integral silicone o-rings easily secure door frame to housing. Gasket seals door frame to housing.
  • LED board arrays offered in various color temperatures and lumen packages. Optional RED LED arrays available on separate circuits (consult ordering key).
  • Symmetric optic includes diffused impact-resistant acrylic lens. Lens sealed to door frame with continuous retention system and supported with stainless steel aircraft cables.
  • Long life LED’s coupled with high-efficiency drivers provide quality illumination. Rated to deliver an L80 performance >50,000 hours. The standard driver has a THD of <20%. Standard low voltage dimming (0-10v, 1%). All electrical components are CSA or UL approved. A ½” EMT hole is provided for wiring connections.
  • UL Listed for insulated ceilings, wet locations. IP65. Suitable for 2500psi pressure spraydown. & certified for ISO3-8 cleanrooms.  NSF listed option.
Aug 01
0

Silea QS-SC2134V

By | New Releases | No Comments
  • 2.5″ H Troffer, Linear LED fixture
  • Direct Distribution
  • Recessed T-Grid mounting (Sheetrock installation with Flange Kit)
  • Nominal 2’x2′ and 2’x4′ sizes
  • Standard 0-10V, 1% dimming drivers
  • L90 greater than 36,000 hours
  • White polyester powder coat finish
  • Integral EM Battery backup option
  • cETLus Listed, Damp location rated
Jun 16
0

akūstik AK9096

By | Uncategorized | No Comments
  • akūstik sound deadening panel – sound absorbing range between .45-.90 NRC
  • Slate, Pewter, Smoke panel colors standard (other colors available)
  • Polyester powder coat finish – White, Black, Silver standard (custom colors available)
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel
  • Direct, Indirect, or Direct/Indirect distributions
  • Flush or 1″ regressed panel position
  • 2700 to 5000K LED color temperatures
  • Standard 0-10V, 1% dimming drivers (Consult factory for other dimming options)
  • Up to 2200lm/ft output
  • 80+CRI standard, 90+CRI optional
  • cETLus Listed, Damp Location rated
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Jun 16
0

akūstik AK9094

By | Uncategorized | No Comments
  • akūstik sound deadening panel – sound absorbing range between .45-.90 NRC
  • Slate, Pewter, Smoke panel colors standard (other colors available)
  • Polyester powder coat finish – White, Black, Silver standard (custom colors available)
  • Construction: Welded extruded aluminum housing with internal components made from die formed cold rolled steel
  • Direct, Indirect, or Direct/Indirect distributions
  • Flush or 1″ regressed panel position
  • 2700 to 5000K LED color temperatures
  • Standard 0-10V, 1% dimming drivers (Consult factory for other dimming options)
  • Up to 2200lm/ft output
  • 80+CRI standard, 90+CRI optional
  • cETLus Listed, Damp Location rated
  • Available with Akustik sound deadening acoustic options
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Jan 19
0

Silea SC2201

By | Uncategorized | No Comments
  • For use with indoor applications where high efficiency, high performance and ease of installation are required.
  • Direct distribution.
  • Nominal 2′ x 2′, 1′ x 4′, and 2′ x 4′ sizes designed for T-Grid installation
  • Flange Kit available for installation in sheetrock ceiling
  • IC Rated for installation in insulated ceilings
  • 3000 to 5000K LED Color Temperatures
  • Optical System: Frosted curved single-piece diffuser
  • Mounting: This luminaire has been specifically designed for T-Bar applications. Integral earthquake clips.
  • Construction: Die-formed, cold rolled heavy-guage steel housing assembly. Wiring access plates and knockouts are provided on back of housing.
  • Finish: White, polyester powder painted housing.
  • Electrical: Long life LEDs coupled with high efficiency drivers provide quality illumination.
  • Rated to deliver L80 performance > 50,000 hours. Standard low voltage dimming (0-10v) driver.
  • Approvals: cETLus Listed, Damp Location Rated
Feb 11
0

Silea SC2191

By | Uncategorized | No Comments
  • 4.50″H Troffer, Linear LED fixture
  • Direct distribution
  • Nominal 1’/2′ x 2′ and 1’/2′ x 4′
  • Wet Location Rated, cETLus Listed
  • Outputs up to 8800lm for 1’/2′ x 2′ and 17600lm for 1’/2′ x 4′
  • 2700 to 5700k, Tunable White and Color options
  • 80CRI standard, 90CRI optional
  • 0-10v dimming down to 1% standard, other options available
  • Lens diffuser options for internal lens
  • Recessed T-Grid or Flanged mounting options
  • White powder coat standard, custom colors available
  • Chicago plenum version available
  • Vandal resistant optional
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Feb 11
0

Silea SC2175

By | Uncategorized | No Comments
  • Recessed lens troffer, 8″ plenum depth
  • Direct distribution
  • Nominal 2′ x 2′, 2′ x 4′, 3′ X 3′ and 4′ X 4′
  • Lens regressed 1.63′”
  • Damp Location Rated, cETLus Listed
  • Multiple output choices per size
  • 2700 to 5700k, Tunable White and Color options
  • 80CRI standard, 90CRI optional
  • 0-10v dimming down to 1% standard, other options available
  • Lens diffuser options
  • Recessed T-Grid mounting, flange kit for 2′ x 2′ and 2′ x 4′ sizes only
  • White powder coat standard, custom colors available
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Jan 22
0

Silea SC2184

By | Uncategorized | No Comments
  • Recessed flush lens troffer, 5″ plenum depth
  • Direct distribution
  • Nominal 2′ x 2′, 2′ x 4′ and 4′ x 4′
  • Damp Location Rated, cETLus Listed
  • Outputs up to 13,200lm for 2’x2′, 26,400lm for 2’x4′ and 52800lm for 4’x4′
  • 2700 to 5700k, Tunable White and Color options
  • 80CRI standard, 90CRI optional
  • 0-10v dimming down to 1% standard, other options available
  • Lens diffuser options
  • Recessed T-Grid and Flanged
  • White powder coat standard, custom colors available
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options
Sep 16
0

pūr-led™ SCX2196PL

By | Uncategorized | No Comments

Antimicrobial LED Luminaire with Vyv White Light Antimicrobial Technology (formally Vital Vio).

FEATURES:

  • Antimicrobial LED Fixture 
  • Various Antimicrobial LED board options.

SPECIFICATIONS:

  • Sealed recessed extruded aluminum disinfecting LED troffer
  • Diffuser: Diffuse lens framed in a gasketed door
  • Finish: White Antimicrobial Polyester Powder Coat
  • Construction: Extruded aluminum housing with internal components of die formed CRS with reflective white enamel coating.
  • Room side access for driver compartment, sealed Junction Box for fixture wiring access, shallow design housing joinable into extended rows
  • Mitred flange corners
  • Standard 0-10v dimming down to 1%*
  • cETLus Listed for Wet Location