CLR-2199

By | New Releases | No Comments
  • Precision formed, TIG welded, 20 gauge cold rolled steel housing with no visible, external hardware.
  • Flange installation is supported by swing-style mounting brackets. Grid installation suitable for 1” and 1.5” T-Bar ceilings. See ordering key for additional 2” T-Bar support.
  • One piece door frame, fabricated from 18 gauge, cold rolled steel with TIG welded corners. It is retained by stainless steel aircraft cables. Flathead, stainless steel, captive fasteners with integral silicone o-rings easily secure door frame to housing. Gasket seals door frame to housing.
  • LED board arrays offered in various color temperatures and lumen packages. Optional RED LED arrays available on separate circuits (consult ordering key).
  • Symmetric optic includes diffused impact-resistant acrylic lens. Lens sealed to door frame with continuous retention system and supported with stainless steel aircraft cables.
  • Long life LED’s coupled with high-efficiency drivers provide quality illumination. Rated to deliver an L80 performance >50,000 hours. The standard driver has a THD of <20%. Standard low voltage dimming (0-10v, 1%). All electrical components are CSA or UL approved. A ½” EMT hole is provided for wiring connections.
  • UL Listed for insulated ceilings, wet locations. IP65. Suitable for 2500psi pressure spraydown. NSF listed option.

Silea QS-SC2134V

By | New Releases | No Comments
  • 2.5″ H Troffer, Linear LED fixture
  • Direct Distribution
  • Recessed T-Grid mounting (Sheetrock installation with Flange Kit)
  • Nominal 2’x2′ and 2’x4′ sizes
  • Standard 0-10V, 1% dimming drivers
  • L90 greater than 36,000 hours
  • White polyester powder coat finish
  • Integral EM Battery backup option
  • cETLus Listed, Damp location rated

Metalli S334

By | Uncategorized | No Comments
  • Direct/Indirect adjustable distribution.
  • Linear LED fixture with adjustable shield.
  • Nominal lengths from 2′ – 4′.
  • Wall mounted – ADA compliant.
  • 0-10v dimming down to 1% standard (consult factory for other dimming options).
  • 2700 to 6500K, 80CRI standard, 90CRI optional.
  • Perforated steel adjustable shield with white acrylic overlay.
  • Construction: heavy gauge cold rolled steel.
  • Finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory).
  • Fixtures cETLus listed for damp locations

Metalli S35DI

By | Uncategorized | No Comments
  • Direct/Indirect output linear.
  • Wall or Suspended mounting – extended row mounting configurations available.
  • Available in multiple standard lengths – Custom lengths available to match customer layouts.
  • ADA compliant wall mounting under 4″ depth.
  • 0-10v dimming down to 1% standard (consult factory for other dimming options).
  • Construction: heavy gauge cold rolled steel.
  • Finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory).
  • All components accessible from below for servicing.
  • Fixtures cETLus listed for damp locations

Peri-Mittari S33P

By | Uncategorized | No Comments
  • Direct output linear perimeter.
  • T-Grid or Flanged for Sheetrock.
  • Available in multiple standard lengths – Custom lengths available to match customer layouts.
  • Flush lens 1″, 2″ or 3″ regressed lens options.
  • 0-10v dimming down to 1% standard (consult factory for other dimming options).
  • Construction: heavy gauge cold rolled steel.
  • Finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory).
  • All components accessible from below for servicing.
  • Fixtures cETLus listed for damp locations

Metalli S44

By | Top 10 | No Comments
  • surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • direct or indirect distribution
  • output up to 2200 lm/ft
  • snap in diffuse acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S33

By | Top 10 | No Comments
  • surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • direct or indirect distribution
  • output up to 2200 lm/ft
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S1249

By | Uncategorized | No Comments
  • wall, surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • ada compliant wall mounting under 4″ depth
  • semi recessed flange and t-grid mounting
  • snap in diffuse ribbed acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S1250

By | Uncategorized | No Comments
  • wall, surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • ada compliant wall mounting under 4″ depth
  • snap in diffuse ribbed acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • available with 0/50/100 step dimming
  • available with integral occupancy sensor for on/off or step dimming applications
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Silea SC2201

By | Uncategorized | No Comments
  • For use with indoor applications where high efficiency, high performance and ease of installation are required.
  • Direct distribution.
  • Nominal 2′ x 2′, 1′ x 4′, and 2′ x 4′ sizes designed for T-Grid installation
  • Flange Kit available for installation in sheetrock ceiling
  • IC Rated for installation in insulated ceilings
  • 3000 to 5000K LED Color Temperatures
  • Optical System: Frosted curved single-piece diffuser
  • Mounting: This luminaire has been specifically designed for T-Bar applications. Integral earthquake clips.
  • Construction: Die-formed, cold rolled heavy-guage steel housing assembly. Wiring access plates and knockouts are provided on back of housing.
  • Finish: White, polyester powder painted housing.
  • Electrical: Long life LEDs coupled with high efficiency drivers provide quality illumination.
  • Rated to deliver L80 performance > 50,000 hours. Standard low voltage dimming (0-10v) driver.
  • Approvals: cETLus Listed, Damp Location Rated