JERA 2

By | Uncategorized | No Comments
  • Edgelit light guide technology
  • Extruded aluminum housing up to 8′ long
  • Direct or Direct/Indirect distributions
  • Lambertian direct output, wide batwing indirect output
  • Available in multiple standard lengths – custom lengths available to match customer layouts
  • 2700 to 5700K LED color temperatures
  • Multiple lumen output options separately specifiable for direct and indirect outputs on D/I
  • Standard integral 0-10V dimming down to 1% – other options available, some options remote drivers only
  • Fully luminous direct aperture
  • Housing Finish: Standard polyester powder coat white, black or silver, other finishes/colors available (consult factory)
  • Interior reflector options – Smooth (STD), Corrugated (OPT)
  • cETLus listed for damp location

MOUNTING STYLES

  • Aircraft Cable
  • Pendant
  • Swivel Pendant
  • Surface
  • T-Grid
  • Flanged for Plaster
  • Flanged for Mud-In

Metalli S44

By | Top 10 | No Comments
  • surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • direct or indirect distribution
  • output up to 2200 lm/ft
  • snap in diffuse acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S33

By | Top 10 | No Comments
  • surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • direct or indirect distribution
  • output up to 2200 lm/ft
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S1249

By | Uncategorized | No Comments
  • wall, surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • ada compliant wall mounting under 4″ depth
  • semi recessed flange and t-grid mounting
  • snap in diffuse ribbed acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Metalli S1250

By | Uncategorized | No Comments
  • wall, surface, suspended or recessed mounting – extended row mounting configurations available
  • available in multiple standard lengths – custom lengths available to match customer layouts
  • ada compliant wall mounting under 4″ depth
  • snap in diffuse ribbed acrylic lens
  • 0-10v dimming down to 1% standard (consult factory for other dimming options)
  • available with 0/50/100 step dimming
  • available with integral occupancy sensor for on/off or step dimming applications
  • construction: heavy gauge cold rolled steel
  • finish: standard polyester powder coat – white, black or silver standard colors – other finishes/colors available (consult factory)
  • all components accessible from below for servicing
  • fixtures cETLus listed for damp locations
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Silea SC2201

By | Uncategorized | No Comments
  • For use with indoor applications where high efficiency, high performance and ease of installation are required.
  • Direct distribution.
  • Nominal 2′ x 2′, 1′ x 4′, and 2′ x 4′ sizes designed for T-Grid installation
  • Flange Kit available for installation in sheetrock ceiling
  • IC Rated for installation in insulated ceilings
  • 3000 to 5000K LED Color Temperatures
  • Optical System: Frosted curved single-piece diffuser
  • Mounting: This luminaire has been specifically designed for T-Bar applications. Integral earthquake clips.
  • Construction: Die-formed, cold rolled heavy-guage steel housing assembly. Wiring access plates and knockouts are provided on back of housing.
  • Finish: White, polyester powder painted housing.
  • Electrical: Long life LEDs coupled with high efficiency drivers provide quality illumination.
  • Rated to deliver L80 performance > 50,000 hours. Standard low voltage dimming (0-10v) driver.
  • Approvals: cETLus Listed, Damp Location Rated

Nelio S4350

By | Uncategorized | No Comments
  • Die formed steel housing up to 8′ nominal length
  • Designed to mount at the intersection of ceiling and wall
  • One piece diffusion lens on 2 sides
  • Available in multiple standard lengths – Custom lengths available to match customer layouts
  • 2700 to 5700K LED Color Temperatures
  • Multiple lumen output level choices from 350 to 2200LM/FT
  • Standard 0-10V, 1% dimming drivers
  • L7O greater than 54,000 hours
  • Standard polyester powder coat. Custom finishes/colors available
  • cETLus Listed, Damp Location rated
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

Peri-Mittari E3126

By | Uncategorized | No Comments
  • Snap-in lenses to control light distribution for Diffuse, Asymmetric, Bat Wing, Wall Graze and Wall Wash applications.  Asymmetric lenses are reversible in fixture for toward or away from the wall output
  • 3 cross sectional profile widths, 2.5″, 3.25″, and 4.0″
  • Mounting options for all common ceiling types
    Continuously illuminated direct output with corners available
  • Customizable under PMC Lighting’s Build2Spec program
  • Wet location available
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options

JERA 1

By | Uncategorized | No Comments

FEATURES

  • Extruded aluminum linear luminaire
  • Edge-lit light guide technology
  • Direct and Direct/Indirect Distribution options
  • Wide bat-wing indirect distribution
  • Suspended mounting
  • Multiple joining pieces for pattern creation

SPECIFICATIONS

  • Extruded aluminum welded housing
  • 2.7” nominal width x 4” depth, standard lengths to 4′
  • Lumen output options: 1000 to 3700 LM/FT direct, 400 to 1500 LM/FT indirect
  • CCT Color Temperature Options: 2700k to 4000k, 80CRI standard, 90CRI optional
  • Integral 0-10v Dimming down to 1% standard, other remote mounted options available
  • cETLus Listed, Damp Location rated

Silea SC2191

By | Uncategorized | No Comments
  • 4.50″H Troffer, Linear LED fixture
  • Direct distribution
  • Nominal 1’/2′ x 2′ and 1’/2′ x 4′
  • Wet Location Rated, cETLus Listed
  • Outputs up to 8800lm for 1’/2′ x 2′ and 17600lm for 1’/2′ x 4′
  • 2700 to 5700k, Tunable White and Color options
  • 80CRI standard, 90CRI optional
  • 0-10v dimming down to 1% standard, other options available
  • Lens diffuser options for internal lens
  • Recessed T-Grid or Flanged mounting options
  • White powder coat standard, custom colors available
  • Chicago plenum version available
  • Vandal resistant optional
  • Available with pūr-led 405nm wavelength antimicrobial lighting options
  • Available with Aura tunable white and RGB/RGBW full color options
  • Available with bios static and dynamic 490nm wavelength circadian lighting options